量子计算正三角形腔内的氢负离子光剥离截面

用传统量子力学方法研究了横截面为正三角形的腔内氢负离子光剥离, 得到了光剥离截面随能量变化的解析表达公式. 该公式还给出了剥离截面的阈值行为. 进一步研究发现, 当氢负离子处于正三角形一角附近时, 用量子力学方法得到的结果与氢负离子处于60°角域内时使用闭合轨道理论得到的结果一致.     

一种高增益低雷达散射截面的新型圆极化微带天线设计

设计了一种基于人工电磁材料覆层的高增益低雷达散射截面(radar cross section, RCS)圆极化微带天线. 人工电磁材料覆层是由介质板及其两侧的人工周期表面构成, 上表面是加载集总电阻的方环贴片, 具有宽带吸波特性; 下表面是开条带缝和圆环缝的金属贴片, 具有部分反射特性. 将其加载到圆极化微带天线上方, 通过覆层上表面的电阻可吸收入射的雷达波, 结合下表面与接地板构成Fabry-Perot谐振腔的多次反射, 可实现圆极化微带天线辐射和散射性能的同时改善. 实测结果表明: 加载人工电磁材料覆层后, 天线的相对轴比带宽由5.9%扩展为7.1%; 天线增益在整个工作频带内都得到了提升, 最大提高了6.61 dB; 天线RCS在宽频带宽角域内实现了明显的减缩, 在天线工作频带内也实现了3 dB以上减缩. 实测结果与仿真结果符合较好.     

多横模垂直腔面发射激光器及其波长特性

基于氧化限制型内腔接触垂直腔面发射激光器(VCSEL) 结构设计, 研究了VCSEL的多横模分布及其模式波长分裂特性与氧化孔径尺寸、形状的关系. 在实验基础上, 通过建立有效折射率模型, 并利用标量亥姆霍兹方程的迭代算法理论, 分别对椭圆形氧化孔径和圆形氧化孔径VCSEL的横向模式特性进行模拟研究, 计算得到不同形状孔径的多横模光场分布情况, 同时测量得到高阶横模多频输出光谱. 研究发现, 椭圆氧化孔形状不仅影响横模分布特性, 还会导致每个模式的波长产生分裂, 分裂值可达0.037 nm. 同时, 随着氧化孔径的增大, 波长分裂影响会逐渐减小, 直至趋近于圆形氧化孔径的分布特性. 研究结果为进一步实现氧化限制型VCSEL的多横模锁定提供了有益参考和借鉴.     

纯相稀土硫化物红色发光材料的高温微波合成及其光谱性质

采用工业频率为2.45 GHz的高温微波法制备了纯基质相的CaS∶Eu2+红色发光材料,激发波段为410~580 nm,发射峰值波长为654 nm。在微波输入功率为1.0~1.1 k W的条件下,可以获得纯基质相CaS∶Eu2+发光材料;在1.2~1.3 k W功率范围,获得的样品中含有Ca O杂质相,且颗粒团聚严重。其中,1.1 k W制备的CaS∶Eu2+样品相纯度最高,发光性能最优。微波功率的变化本质上揭示了固体颗粒的介电损耗因子及其加热特性的变化,体系涉及的非平衡反应机制促使了纯基质相的形成,并影响材料晶相结构、粒径、形貌和发光性能。结果显示,高温微波制备技术通过控制输入功率及其物料的介电损耗性质,能够获得纯基质相并且颗粒小、团聚少的荧光粉。     

基于微蒸发腔制冷的大功率激光二极管制冷组件

利用节流的高压冷却介质在微蒸发腔内相变吸热,设计了一种用于大功率激光二极管制冷的封装组件。该组件采用高热导的无氧铜,用精密线切割、化学腐蚀等技术制作微蒸发腔,再通过自制的焊接设备完成制冷组件的封装。按照大功率激光二极管条的发热模型,理论上对微蒸发腔制冷组件的温度分布进行了数值模拟,结果与60 W激光二极管条的散热实验符合较好,得到制冷剂流量为23 m L/min时的热阻为0.289℃/W。     

Large‐acceptance diamond planar refractive lenses manufactured by laser cutting

For the first time, single‐crystal diamond planar refractive lenses have been fabricated by laser micromachining in 300 µm‐thick diamond plates which were grown by chemical vapour deposition. Linear lenses with apertures up to 1 mm and parabola apex radii up to 500 µm were manufactured and tested at the ESRF ID06 beamline. The large acceptance of these lenses allows them to be used as beam‐conditioning elements. Owing to the unsurpassed thermal properties of single‐crystal diamond, these lenses should be suitable to withstand the extreme flux densities expected at the planned fourth‐generation X‐ray sources.     

Interaction soliton–sable dans un canal en eau peu profonde

Interaction between solitons and a sandy bed in shallow water is investigated. In our experiments, solitons are generated on the background of a harmonic wave, in a wave flume used in resonant mode. It is found that the sand ripples formed by the solitons propagation induce a significant decrease of solitons amplitude and of the phase shift between the soliton and the harmonic wave. However, the amplitude of the harmonic wave is approximately constant. The possible physical processes of such behaviour for the soliton amplitude and for the harmonic wave amplitude are discussed. To cite this article: F. Marin et al., C. R. Mecanique 333 (2005).     

DYNAMICAL FORMATION OF CAVITY FOR COMPOSED THERMAL HYPERELASTIC SPHERES IN NONUNIFORM TEMPERATURE FIELDS

Dynamical formation and growth of cavity in a sphere composed of two incompressible thermal-hyperelastic Gent-Thomas materials were discussed under the case of a non-uniform temperature field and the surface dead loading. The mathematical model was first presented based on the dynamical theory of finite deformations. An exact differential relation between the void radius and surface load was obtained by using the variable transformation method. By numerical computation, critical loads and cavitation growth curves were obtained for different temperatures. The influence of the temperature and material parameters of the composed sphere on the void formation and growth was considered and compared with those for static analysis. The results show that the cavity occurs suddenly with a finite radius and its evolvement with time displays a non-linear periodic vibration and that the critical load decreases with the increase of temperature and also the dynamical critical load is lower than the static critical load under the same conditions.     

回转体局部空泡绕流的非线性分析

基于面元法, 通过在回转体和空泡壁面放置源汇,对回转体定长局部空泡的绕流问题进行了分析和讨论,并提出了求解回转体局部空泡绕流“正问题”的方法。计算结果表明：所给出的方法具有快速收敛的特征,第1次迭代和最终收敛时空泡壁面切向速度的误差不超过5％;随着回转体面元总数N的增加,局部空泡的空泡数σ趋于稳定;通过比较可知,该方法得到的理论估算值与实测值的一致性较好。